Power Amplifier, 4x120W | Audac CAP412
රු699,900.00
4-channel 2U rack-mount power amplifier with balanced XLR inputs. 4 x 120 Watts @ 100 Volts, 70 Volts, or in to 4 ohms.
Warranty: 1-year repair warranty for manufacturing defects
Out of stock
Key Features
- Four independent channels of high efficiency Class-D amplification
- Power output of 120 watts (RMS) per channel @ 100 volts, 70 Volts, or in to 4 Ohms
- Balanced XLR input & loop-out sockets for each channel
- Rear panel gain control & HPF switch for each channel
- Independent terminal block speaker connector for each channel
- Universal voltage switched mode power supply (100 ~ 240 Vac / 50 ~ 60 Hz)
- DC leak, overload and thermal protection
- Temperature controlled fan cooled
- 19″ rack mounting brackets included (2U height)
Specifications
| RMS Power | 4 x 120 W | |
| Signal / Noise | > 100 dB | |
| THD+N (@ 1 kHz) | < 0.3% (1/2 Rated Power) | |
| Crosstalk (@ 1 kHz) | < 80 dB | |
| Technology | Class-D | |
| Common mode rejection ratio | 70 dB | |
| Protection | DC Short circuit | |
| Over heating | ||
| Over load | ||
| Signal limiting | ||
| Cooling | Temperature controlled FAN | |
| Operating temperature | 0° ~ 40° @ 95% Humidity | |
| Frequency Response (± 3 dB) | 50 Hz – 22 kHz | |
| Power | Supply | Switching mode |
| Source | 100 ~ 240 V AC / 50 ~ 60 Hz | |
| Inputs | Sensitivity (1W/1m) | -0.5 dB ~ 10.5 dB |
| Impedance | 10 kΩ balanced | |
| Connector | XLR female (balanced) with male link-through | |
| Outputs | Voltage / Impedance | 100 V / 83 Ω |
| 70 V / 42 Ω | ||
| 4 Ω | ||
| Connector | 4-pin Euro Terminal Block (Pitch – 5.08 mm) | |
| Dimensions | 482 x 88 x 420 mm (W x H x D) | |
| Weight | 14.8 kg | |
| Mounting | 19” | |
| Rack height | 2U | |
| Construction | Steel | |
| Colour | Black | |
| Accessories | Included | 4 x 4-pin Euro Terminal Block outputs connector |
Documentation
- Data Sheet (PDF)
- User Manual and Installation Guide (PDF)